Skip to main content
Loading…
This section is included in your selections.

In addition to BDC Chapter 3.3, Vehicle Parking, Loading and Bicycle Parking, the following standards apply:

A. Parking on the ground floor within a structure must be designed so that parked vehicles are screened from view at street level.

B. Parking is allowed on the side and rear of buildings. If located on the side, the parking area may not exceed 50 percent of the total lineal frontage of the site and must be set back 10 feet from the front property line or three feet behind the front building facade, whichever is greater. For corner lots, the parking area may not exceed 50 percent of the total lineal frontage for all front property lines and frontages.

C. Parking and maneuvering areas including driveways are prohibited between the street and the front of the building. [Ord. NS-2462, 2023; Ord. NS-2443, 2022; Ord. NS-2423, 2021; Ord. NS-2404, 2021; Ord. NS-2389, 2020; Ord. NS-2367, 2020; Ord. NS-2303, 2018; Ord. NS-2271, 2016]